French Drain Info and Design, Oklahoma City, Yukon, Mustang

The term, "French Drain" gets thrown around a lot.  Many times people say they need a "French Drain," when they mean Surface Drain, or Channel Drain.  It is becoming a Catch-All Phrase that may refer to any type of drain.  French Drains provide specific benefits that are different from Surface Drains.

Just what is a "French Drain?" Many times people incorrectly

A French Drain can protect your foundation!

use the phrase, "French Drain," when they mean "Surface Drain" or "Channel Drain."

Surface Drian

 

Channel Drain

 

A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench. The French Drain Trench runs through a Problem Drainage Area that needs to be drained.   The French Drain Pipe is perforated (Full of Small Holes) and has Neo-Prene Soc around the pipe.  This soc helps prevent debris from clogging the French Drain Pipe.

Perforated French Drain Pipe

 

The dirt that was taken out to make the trench is hauled away. It is replaced by some type of small stone or gravel depending on what is desired or available. I prefer crushed 1 inch lime stone. It is the most economical option in my area. Pea Gravel or some other type of small stone can work just as well. The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level). In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed. This helps maintain the integrity of the trench over time. It also increases the cost of the French Drain and the amount of time to install it. I install a trench liner in a French Drain about 20% of the time. Most of the time a liner in not needed.

French Drain March 2011

A French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations. It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it.

 

 

 

The main downfall of a French Drain is that they, for the most part aren't very pretty. They don't look very nice in a yard once they are completed.

Depending on the area the French Drain is installed and the type of grass around the French Drain, will dictate whether grass grows over the lime stone. Grass can grow up and through the gravel in the French Drain over time eventually covering the gravel. This is Ok. It won't have a measurable effect on the performance of the drain.

French Drain

 

DONT COVER THE GRAVEL IN THE FRENCH DRAIN WITH DIRT. THE FRENCH DRAIN WON'T WORK IF THE TRENCH IS CLOGGED WITH DIRT. DON'T EVEN INSTALL IT IF YOU ARE GOING TO COVER IT UP WITH DIRT.

DECORATIVE STONE CAN BE USED TO COVER A FRENCH DRAIN AND THEY LOOK GREAT AND LAST A LIFETIME.

 The French Drain Installation we did this week was a little more difficult than normal.  Many times the route that a Perforated French Drain Pipe must travel to its exit point is not very easy from an installation point of view.  French Drains may have to travel through tree roots, (big ones) under sidewalks, through retaining walls, around swing sets or dog kennels or Mom's Prize Rose Bush.  The 4 inch French Drain we installed this week was in Oklahoma City south of 23rd in an old part of town where all the houses were old 2 or 3 story homes with lots of huge Elm Trees.  The Elm Tree in Question actually was just an old stump that had been topped out but not completely removed.  They left the roots just for us!  The roots were growing into the homes foundation and were right in the way of the path of the French Drain.  Forty feet of solid Elm Roots and 4 chain-saw blades later CMG was successful in running a new French Drain through a tree stump.  Yuck! "Well you gotta  do what you gotta do!"

French Drain with colored river rock

A little info about French Drain Pipe and Tree Roots.  Normally tree roots don't seek out and penetrate French Drain Pipe.  Tree roots seek moisture and residual water that may stay inside Solid Drain Pipe.  French Drain Pipe is perforated.  Water that does not reach the exit point of the French Drain will seep out of the Pipe into the surrounding dirt.  Solid Drain Pipe that is used with Surface Drains can be penetrated and eventually clogged by roots if the pipe does not have good slope or "Fall".  If the solid pipe does not drain well and has residual water, tree roots will seek it out.
Check out our most popular blog!

Drain Pipe running from French Drain to the street in Oklahoma City

Drainage Systems are designed to protect your home or business from standing water.  Storm-Water Runoff can cause damage in many ways.  Water from your gutters can seep down into your home's foundation if it has no good way to drain off.  If the temperature then drops below freezing, the water around your foundation can freeze and cause serious damage to the home's foundation.  Foundation repair can cost more than a Drainage System.
Drainage Systems typically make use of , French Drains, Surface Drains, or Channel Drains.  Depending on the Drainage Problem, A Drainage System may utilize one or several types of Drains.  CMG might install, for example, A Surface Drain in the middle of a driveway that runs to a gutter that is connected into the drain pipe.  The Drain Pipe might continue to a French Drain running parallel to a homes foundation.  Next the drain pipe might continue to a channel drain cutting across a sidewalk.  The Drain pipe might then reach its exit point running out through a curb fitting installed and cemented through the curb.
A Surface Drain basically is a basin that has a grate on the top.  A drain pipe is connected to the basin below ground.  The water flows in through the grate and down into the basin.  The water then exits the Basin through the Drain Pipe and move toward the exit point of  the Drainage System.  Surface Drains are designed to handle water that accumulates in a low areas.   These areas should not be too large or broad, and the water that drains into a surface drain should not be moving very fast.  Surface Drains can become overwhelmed if they are placed in an area that must move a large volume of water, quickly.  Selecting the correct drain for the specific drainage problem is a benefit that CMG provides through twenty years of experience.

Drainage System Installation, French Drain, Surface Drain, Channel Drain,

CMG Sprinklers and Drains -- Providing: French Drains, Surface Drains, Drainage Systems, Lawn Sprinkler Systems, and Sprinkler Repair.

CMG is based in Norman.  We Service Surrounding Central Oklahoma including:  Oklahoma City, Moore, Edmond, Yukon, Mustang, Midwest City, Del City, Blanchard, Newcastle, and Purcell.  405-226-0629  cmgsprinklers@gmail.com

 

French Drain Installation this week was a little more difficult than normal.  Many times the route that a Perforated French Drain Pipe must travel to its exit point is not very easy from an installation point of view.  French Drains may have to travel through tree roots, (big ones) under sidewalks, through retaining walls, around swing sets or dog kennels or Mom's Prize Rose Bush.  The 4 inch French Drain we installed this week was in Oklahoma City south of 23rd in an old part of town where all the houses were old 2 or 3 story homes with lots of huge Elm Trees.  The Elm Tree in Question actually was just an old stump that had been topped out but not completely removed.  They left the roots just for us!  The roots were growing into the homes foundation and were right in the way of the path of the French Drain.  Forty feet of solid Elm Roots and 4 chain-saw blades later CMG was successful in running a new French Drain through a tree stump.  Yuck! "Well you gotta  do what you gotta do!"

 

French Drain with colored river rock

A little info about French Drain Pipe and Tree Roots.  Normally tree roots don't seek out and penetrate French Drain Pipe.  Tree roots seek moisture and residual water that may stay inside Solid Drain Pipe.  French Drain Pipe is perforated.  Water that does not reach the exit point of the French Drain will seep out of the Pipe into the surrounding dirt.  Solid Drain Pipe that is used with Surface Drains can be penetrated and eventually clogged by roots if the pipe does not have good slope or "Fall".  If the solid pipe does not drain well and has residual water, tree roots will seek it out.

Check out our most popular blog!

Drain Pipe running from French Drain to the street in Oklahoma City

Drainage Systems are designed to protect your home or business from standing water.  Storm-Water Runoff can cause damage in many ways.  Water from your gutters can seep down into your home's foundation if it has no good way to drain off.  If the temperature then drops below freezing, the water around your foundation can freeze and cause serious damage to the home's foundation.  Foundation repair can cost more than a Drainage System.

Drainage Systems typically make use of , French Drains, Surface Drains, or Channel Drains.  Depending on the Drainage Problem, A Drainage System may utilize one or several types of Drains.  CMG might install, for example, A Surface Drain in the middle of a driveway that runs to a gutter that is connected into the drain pipe.  The Drain Pipe might continue to a French Drain running parallel to a homes foundation.  Next the drain pipe might continue to a channel drain cutting across a sidewalk.  The Drain pipe might then reach its exit point running out through a curb fitting installed and cemented through the curb.

A Surface Drain basically is a basin that has a grate on the top.  A drain pipe is connected to the basin below ground.  The water flows in through the grate and down into the basin.  The water then exits the Basin through the Drain Pipe and move toward the exit point of  the Drainage System.  Surface Drains are designed to handle water that accumulates in a low areas.   These areas should not be too large or broad, and the water that drains into a surface drain should not be moving very fast.  Surface Drains can become overwhelmed if they are placed in an area that must move a large volume of water, quickly.  Selecting the correct drain for the specific drainage problem is a benefit that CMG provides through twenty years of experience.

French Drain, Drainage System, Sump Pumps, Drain Pipe

Since 1993 we have gained a lot of experience addressing drainage problems.  Solving Drainage problems can be complicated.  The solution is not always clear to the untrained eye.  CMG has redone or overhauled many drainage systems that were installed by, "weekend warriors, a brother-in-law, or a landscaping company that also installs drains."  They all can install Drainage Systems, Just not very well.


 CMG has over 20 years of experience Diagnosing Drainage Problems.  We utilize French Drains, Surface Drains, Channel Drains and Sump Pumps.  This ensures that a Drainage System that we install won't have Drain Pipes that are too small, or Surface Drains installed where French Drains Should be placed, or Exit Points that allow water to Stand and become stagnant.  The above examples are just three of many "Pit - Falls" that our experienced Drainage System Experts can easily avoid.

If you live in Yukon and have water standing in your yard after a hard rain, or if you live in Oklahoma City and your driveway turns into a pond after a thunder-storm, Give CMG Sprinklers and Drains a call! We service all of Central Oklahoma including, Moore, Norman, Edmond, Yukon, Midwest City, Del City, Oklahoma City, Mustang, Tuttle, and Blanchard, and all surrounding areas.

Too much of anything is never good, especially water.  Standing water can cause damage to sidewalks, driveways, and foundations.  Water can also seep into floor vents and under homes.  During a hard rain water can even run inside homes and business when Drainage is poor.

Surface Drain installed in Oklahoma City

For 21 years, CMG has solved Drainage Problems for people in Central Oklahoma.  Experience is key in diagnosing Drainage Problems.  Some Drainage Problems are Simple and straight forward others are complex and difficult.  CMG utilizes a wide variety of Drains and Drain Pipes when designing a Drainage System.  A Simple Drainage System may use one type of Drain running through a Drain Pipe to an Exit Point.  A Complex Drainage System may use several types of Drains and Drain Pipes running to many exit points.  CMG Utilizes:  French Drains, Surface Drains, Channel Drains, Trench Drains and Sump Pumps.  The Drain Pipe we use may be  ADS, PVC, or Sewer and Drain Pipe.  Which Drain and Pipe used depends on the particular Drainage Problem.

Installing French Drain and Curb Outlet in Drainage System in Norman.

A Drainage System using a 4 inch French Drain, connected to a 12 inch basin with a grate, which is also connected to the Gutter Down-Spouts and running to two separate exit points is an example of a moderately complex Drainage System.

Installation of a Drainage System, French Drain, In Norman Oklahoma

CMG has installed Drainage Systems all across Central Oklahoma including,  Oklahoma City, Edmond, Norman, Moore, Purcell, Newcastle, Tuttle, Yukon, Mid West City, Mustang, Del City, and Purcell, and all surrounding areas.

French Drain, Drainage System, Surface Drain, Channel Drain, Pop-Up Emitter

Edmond Oklahoma has been the location for many French Drain Installations for CMG in the past several years.  Recently we ripped out an old Surface Drain that was under a deck.  The Surface Drain was too small for the job and did not Protect the Foundation from Standing Water. 

 The First step was to take out part of the deck along the wall.  Next we took out the Surface Drain and the Three Inch Pipe which was too small.  Digging a trench along the foundation came next.  We had to ensure the, "Fall" to make sure the water would run from left to right. 

 Next a French Drain Liner  needed to be installed.  This was necessary to maintain the integrity of the trench and to keep the French Drain Pipe from filling up with sand and getting clogged over the next few years.  CMG then installed 4 inch ADS Perf/Soc French Drain Pipe along the course of the French Drain.  Next we connected the end of the French Drain Pipe to Solid 4 Inch ADS Drain pipe to continue along the trench to the Pop-Up Emitter at the Exit Point.

Connecting a gutter to a Drainage System

CMG installed a 4 inch French Drain in East Norman this week.  The customer had water standing on the side of his house that was causing foundation damage.  He contracted a Structural Engineer to come out and look at the Drainage Problem and to give him some advise.

6 inch French Drain

The Structural Engineer recommended a French Drain to protect and draw water away from the foundation.  He said that, "he had recommended French Drain Installation to solve similar problems for home owners many times in the past.  The Structural Engineer was confident that it would solve the Drainage Problem.

Next, our customer went online and found us by searching under, " Norman Oklahoma French Drain."  He also checked us out on Angie's List and Found that we were one of the highest ranked Drainage Contractors in the state of Oklahoma for installing French Drains.

Drain Pipe running to Pop-Up Emitter

The Gentleman gave us a call to set up an appointment.  CMG arrived on the agreed time and provided a ( Free- No Obligation- Drainage Diagnostic and Quote) We came out and looked at his Drainage Problem and designed a Drainage System to solve his, Standing-Water Problem."  We also recommended a surface drain in a corner where water was coming off a steep part of the roof and overwhelming the gutter.

Installing a curb outlet for a French Drain in Norman

The customer let us know that he was ready to move forward.  We scheduled the Drainage System Installation for the following week.  When the scheduled day arrived, we installed the Drainage System.  The Drain was made up of a 6 inch French Drain running 30 feet along the East side of the house.  It curved around the corner of the house.  At that point a 12 inch Surface Drain was connected to the French Drain with 4 inch pipe.  The 6 inch French Drain at that point changed to 6 inch Solid Drain Pipe and continued under ground 65 feet to a pop-up emitter at the curb in the front yard near the street.

Problem solved!